What's a Reasoanble Amount of Trub?

Mon Jan 15, 2007 10:14 am

How much trub do you end up with in your boil kettle? I end up with 1.5 gallons, so I alter all my recipes to make 6.5 gallons. What volume of trub do you get? I use the two plastic bucket method from my lauter tun. I am thinking that the 1/8 inch holes are too large and causes the excess trub. I do vorlauf or what ever it's called when you take the first runnings and pour it back in the lauter tun.

Cheers!
Fishemulsion
 
Posts: 39
Joined: Tue Dec 12, 2006 3:54 pm
Location: Seattle, WA

Mon Jan 15, 2007 11:02 am

I think you get trub from the boil, or am I wrong? I usually have about .75 gallons in a six gallon batch...
User avatar
BrewPilot
 
Posts: 40
Joined: Tue Jan 02, 2007 11:55 am
Location: Kodiak, AK

Mon Jan 15, 2007 11:11 am

Are you getting actual grain particulate matter in your kettle?

And yes, you should be vorlaufing to set your grain bed.

Push Eject
Asshat of the Year ('06)
Proud Drunk of the Year Nominee ('08)
Beevo, "I burned my tongue."
Doc, "Slow down."
Gadgets
CoVBS
User avatar
Push Eject
Butcher
 
Posts: 2056
Joined: Fri Apr 28, 2006 12:52 pm
Location: Lancaster, CA

Mon Jan 15, 2007 11:20 am

The trub is very fine and looks like a thick uniform layer of fog on the bottom of the tank. I don't really see any grain particulates. Could this be from too fine milling?
Fishemulsion
 
Posts: 39
Joined: Tue Dec 12, 2006 3:54 pm
Location: Seattle, WA

Mon Jan 15, 2007 2:15 pm

Are you using hop pellets? They will look like that at the end of the boil. If you use at least some leaf hops, They will filter out a lot of that when you siphon so you leave a lot less wort in the kettle.

Wayne
Bugeater Brewing Company
Bugeater Brewing Company
http://www.lincolnlagers.com
User avatar
Bugeater
 
Posts: 5789
Joined: Thu Jun 09, 2005 9:19 pm
Location: River City

Mon Jan 15, 2007 2:29 pm

I get the same sort of trub at the bottom. It seems like a mix of hot/cold break and pellet hops. I do the same thing and just plan to leave 1.5gal behind just to avoid waiting for it to settle more. I need to get a diverter plate when I upgrade to my next kettle.
User avatar
BrotherhoodBrew
 
Posts: 220
Joined: Wed Jan 11, 2006 5:24 pm
Location: Carrollton, TX

Mon Jan 15, 2007 2:40 pm

Yes, I use hop pellets almost exclusively. Does the diverter plate really work? The logic of it is appealing which usually means with me that it doesn't work very well :-) Ofcourse, the plate would have to be high enough such that the fog of trub didn't roll over the sides after it settled to uniform hight after whirlpooling. Do you use a hop bag with the whole hops? I can see that effectively reducing the amount of trub.
Fishemulsion
 
Posts: 39
Joined: Tue Dec 12, 2006 3:54 pm
Location: Seattle, WA

Mon Jan 15, 2007 5:56 pm

I get just the same thing using pellets. and there is about 3.5 litres left in my kettle that I cant use. I've been thinking about boiling my hops in a hop bag to try and reduce it a little.
User avatar
Thirsty Boy
 
Posts: 1051
Joined: Fri May 19, 2006 12:46 am
Location: Melbourne Australia

Next

Return to All Grain Brewing

Who is online

Users browsing this forum: No registered users

A BIT ABOUT US

The Brewing Network is a multimedia resource for brewers and beer lovers. Since 2005, we have been the leader in craft beer entertainment and information with live beer radio, podcasts, video, events and more.