Thu Apr 13, 2006 6:17 am
Carlo,
Based on my reading and on my first decoction mash a few weeks ago for an Oktoberfest, the answer depends on how long it will take you to get the decoction portion up to the desired temp. So, if you are taking 4 quarts (just a number here, not a suggestion) and then bringing it to a boil AFTER stopping at mash out for 10 minutes, you need to estimate how long it will take you to get the decoction up to boiling temp. Then subtract that from your 45 min.
So, if you will take 5 min to get the decoction to 168, and then sit for 10 minutes before going to boiling, taking 15 min to get there, and then boil for 10 min before adding back to your mash, you will want to pull your decoction 40 minutes BEFORE the end of your Sacch. rest.
This is just an example, and all of this will vary depending on the amount you pull, the thickness of it, the size of the burner you use for the decoction, and so on. Keep in mind though that if your main mash sits at 154f for MORE than 45min it's not going to hurt.
If you use Promash or BeerSmith they both have good calculations for this procedure, but you will still need to guess at how long the decoction process will take. Once you have done it a couple of times you will get a good idea and be able to plan better. For now though, just make sure to monitor your main mash while working on your decoction, and make sure the temp doesn't drop.
Of course, all of this is just my 1,250 cents...
Good Luck!
Rob