Partial Bottle Condition

Thu May 28, 2015 2:47 pm

Comrades

Getting ready to enter a Bavarian Hefeweizen to a local home brewing competition. Since Bavarian Hefs are typically bottle conditioned for the strong haze and frothy head, I wanted to bottle a couple just for the competition, but not the whole batch -- I prefer drinking from the kegerator.

I don't want to over carb the bottles, but I feel like bottling from the kegs wouldn't have the same effect as bottle conditioning. Is there a solution to this? How do I calculate sugars for such a small dose?
User avatar
BrandenBA
 
Posts: 7
Joined: Fri Sep 26, 2014 11:16 am
Location: Bend, Ore.

Re: Partial Bottle Condition

Thu May 28, 2015 5:44 pm

For what it's worth, the head is not really related to bottle conditioning (it's more about protein content of the wort/beer), and the guidelines allow for a lot of variability in clarity.

But in general, to just bottle a few bottles, Coopers sells little sugar drops that you can just drop in the bottle: http://www.amazon.com/Coopers-Home-Brew ... B003E5ZYB8 . One probably won't get you the high carbonation you want in a hefeweizen though.
User avatar
siwelwerd
 
Posts: 872
Joined: Mon Apr 21, 2008 7:09 pm
Location: Tuscaloosa

Re: Partial Bottle Condition

Fri May 29, 2015 10:01 am

It depends on how carbed the beer is in the keg already.

If you're at a known volumes of CO2, you could subtract that from your final desired volumes & prime for the remainder. It likely won't be exact, but it'll give you a relatively close starting point.

On a side note, I've used those Coopers carb tabs before. They're kind of a pain in the ass & rather inconsistent. Some of them are next to impossible to fit through the mouth of the bottle. There's another brand that makes smaller ones that are a little better.

Honestly I don't get enough difference between forced carb & natural carb to make the extra effort worth it. If it were me I'd just CP fill off the keg & be done with it. Or if I *really* wanted natural carbed bottles, I'd set aside enough to do a 6 pack before I kegged it in the first place. Then you just calculate for the smaller volume... about a gallon.
Lee

"Show me on this doll where the internet hurt you."

"Every zoo is a petting zoo if you man the fuck up."

:bnarmy: BN Army // 13th Mountain Division :bnarmy:
User avatar
Ozwald
Global Moderator
 
Posts: 3658
Joined: Sun Sep 20, 2009 4:14 pm
Location: Gallatin Gateway, Montana

Re: Partial Bottle Condition

Sat May 30, 2015 10:10 am

I don't think you will have much luck transferring carbonated beer into your bottles along with more sugar. The yeast aren't simply just going to wake up and immediately consume any remaining sugars in the bottle. Once you have kegged, chilled, and carbonated the beer you are drinking it really is done time for the yeast. Their ship has sailed at this point.

Your best bet, as Oz said, is to fill your bottles with a beer gun or counter pressure filler. Be sure to jack up the psi on the gas a couple days before as you will lose some of the pressure upon transfer.
"A bad man is a good man's job, while a good man is a bad man's teacher."
brewinhard
Global Moderator
 
Posts: 4065
Joined: Sat Oct 25, 2008 8:41 am
Location: Fredonia, NY

Return to Kegging, Bottling and Dispensing

Who is online

Users browsing this forum: No registered users

A BIT ABOUT US

The Brewing Network is a multimedia resource for brewers and beer lovers. Since 2005, we have been the leader in craft beer entertainment and information with live beer radio, podcasts, video, events and more.