Tue Aug 15, 2006 5:01 pm

Don't dare me, i make my way through Milwaukee often enough on my way back and forth from chicago. one of these times i may just have to take you up on that offer.
User avatar
polski
 
Posts: 324
Joined: Thu Feb 09, 2006 9:01 am
Location: St. Paul, MN

Wed Aug 16, 2006 11:48 am

I got a 10lb tank on Ebay for $10 or $12. With shipping it was about $35.

If you've exhausted all of these ideas, how about stealing one? That's fresh and new! Or you could try pulling one out of... oh nevermind!

Good Luck!
My nuts are half way up my ass, but other than that I'm perfect!
User avatar
Captain Kangabrew
 
Posts: 67
Joined: Mon Jan 30, 2006 10:44 am
Location: Frisco, Texas

Tue Aug 22, 2006 6:48 am

Mr. Big wrote:Get a 20 lb tank! Too bad you are not close to me. I come up with CO2 tanks all the time. I'm in the beverage business, and often get cornys, regulators, CO2 tanks, cold plates, connects, etc for free from my customers. I have 15 20 lb tanks in my garage right now. I take them to the local CO2 place - one where they test - and get them sandblasted, painted, tested, and filled for under $30.00 each. I am looking at getting several 50 lb tanks, (for free) so I never have to haul a tank in my basement again. I also get some of the tanks filled with beer gas - 70% nitrogen, 30% CO2 for my stouts and british ales. One of my customers gave me twenty 2.5 gallon corny kegs and twelve 3 gallon kegs. What a find!


Hi there...

I found a Welding shop here just yesterday.
I have a 5# tank that I'm wanting to get filled with beermix 70%/30%.

Do you have to have anything special to get your tanks to go 70%/30%?
User avatar
shawnintennessee
 
Posts: 10
Joined: Sat Jan 28, 2006 10:24 am
Location: Middle Tennessee

Tue Aug 22, 2006 8:25 am

Nitrogen is a gas, CO2 is a liquid. They have to put in a new draw tube - one with holes throughout, not just the bottom. This way, the gases combine when the tank is opened. You can use your standard regulator with the beer gas mix. Also, for those who are getting their CO2 tanks from behind bars, finding them at rummage sales, etc., be careful. The tanks are often identified by their paint pattern or color that is specific to a company that owns the tanks. Some CO2 places will refuse to fill your tank if they think it belongs to someone else. In fact, they might confiscate it. A little touch-up paint might help the appearance. Note also that aluminum tanks can be painted, but not sand blasted.
I brew, therefore I am.
Mr. Big
 
Posts: 73
Joined: Tue Aug 08, 2006 5:45 pm
Location: Milwaukee

Tue Aug 29, 2006 3:12 pm

I have been told that buying a tank wasn't worth it because they go out of commission and renting is a better deal. Do tanks really go out of commission or do they just need to be tested every so often?
User avatar
PunkIwishIwere
 
Posts: 66
Joined: Thu Aug 03, 2006 11:20 am
Location: Hanna City, IL

Tue Aug 29, 2006 4:47 pm

PunkIwishIwere wrote:I have been told that buying a tank wasn't worth it because they go out of commission and renting is a better deal. Do tanks really go out of commission or do they just need to be tested every so often?


Well, the oldest certification date on my 5# tank is August, 1969 and it's still going strong. You just need them recertified every 5 years or so. I forget the exact length of time at the moment.

Wayne
Bugeater Brewing Company
Bugeater Brewing Company
http://www.lincolnlagers.com
User avatar
Bugeater
 
Posts: 5789
Joined: Thu Jun 09, 2005 9:19 pm
Location: River City

Wed Aug 30, 2006 1:03 pm

Recertification is every 5 years, and should cost anywhere from $6.00 on up to $15.00. Go directly to a CO2 company (in the phone book), as you will get your tank back if you want it. Watch out! Sometimes the guy will try an exchange on you, and lock you into dealing business with them (the identified tanks). Also, they might give you a tank just going out of inspection. Both these things happened to me, and of course i didn't find out I'd been screwed for a year, when the gas ran out. Fortunately, I have hooked up with a good CO2 provider now, and he helped me out.
I brew, therefore I am.
Mr. Big
 
Posts: 73
Joined: Tue Aug 08, 2006 5:45 pm
Location: Milwaukee

Previous

Return to Brewing Equipment

Who is online

Users browsing this forum: No registered users

A BIT ABOUT US

The Brewing Network is a multimedia resource for brewers and beer lovers. Since 2005, we have been the leader in craft beer entertainment and information with live beer radio, podcasts, video, events and more.