Single tier

[NobleBrew]

Here is my rig. It is full DDC (computer controlled) with the exception of flame controll. That is an upgrade in progress. The next upgrade will be a web server to monitor it from work. Fermentation control and kegerator are also on a similar controller and networked together!

http://i147.photobucket.com/albums/r305 ... w/Rear.jpg

http://i147.photobucket.com/albums/r305 ... ront_B.jpg

http://i147.photobucket.com/albums/r305 ... CT0318.jpg

http://i147.photobucket.com/albums/r305 ... /brew6.jpg

http://i147.photobucket.com/albums/r305 ... w/mash.jpg

http://i147.photobucket.com/albums/r305 ... CT0308.jpg

http://i147.photobucket.com/albums/r305 ... CT0304.jpg

http://i147.photobucket.com/albums/r305 ... /brew3.jpg

[Monster Mash]

Nice looking rig!! Lock that thing up at night or somebody will take off with that copper railing...

The only thing I would have done different would be to use rigid conduit instead of flex. Nice work!!

[baltobrewer]

That's rockin!

Love the sight glass. That's inventive......

[Monster Mash]

The sight glass is off a boiler, I have one just like it on my 25hp boiler.

[Beermaker]

How the hell do you clean out the kegs if they are all hard piped?

[Wild Bill]

So is that a hop stopper you are using in the bk? or did you build your own. If so what are the specs on your SS mesh? I would love to make my own to save $60 or $90 bucks.

Thanks

[Bugeater]

So is that a hop stopper you are using in the bk? or did you build your own. If so what are the specs on your SS mesh? I would love to make my own to save $60 or $90 bucks.

Thanks

Here is a source for the perforated SS sheet material. http://www.smallparts.com/products/desc ... 20PMXX.cfm
I bookmarked this some time agao thinking I would build my own too.

Wayne
Bugeater Brewing Company

[Wild Bill]

Here is a source for the perforated SS sheet material. http://www.smallparts.com/products/desc ... 20PMXX.cfm
I bookmarked this some time agao thinking I would build my own too.

Wayne
Bugeater Brewing Company

Yowsers for those prices you might as well get it pre-made. I'm thinking about getting some of the SS wire cloth from McMaster Carr but the number of choices they have makes the process daunting. Too fine and it clogs, too coarse and it's no use to you ether...

I found this thread some time ago that talks about using splatter screens found at a kitchen store. That sounds like an inexpensive option if it works.