Re: Who owns these pix of a cooler with a hole cut in the li

Mon Jul 09, 2012 10:39 am

BeerPal wrote:...I can't open the lid very much to get ice in with the keg inside. I'm thinking I'll have to defeat the hinge and simply lift the lid off when I want to put ice in.

Problem solved! It turns out the little "hinge pins" are really nothing more than small, round tabs that are easily pried out of their receiver holes in the hinge body with a flathead screwdriver. So it looks as if removing the lid to fill the cooler with ice while the keg is in place can be easily done with no additional modification to the lid.

Image

Image
"Make beer not war"

Currently fermenting: Firestone Walker Pale 31 clone
Conditioning: Nothing
On draught: Nothing

Watch episodes of BYOB TV: http://www.kofytv.com/byob-tv/archive/
User avatar
BeerPal
 
Posts: 1633
Joined: Sat Jun 04, 2005 6:55 am
Location: Martinez, CA

Re: Who owns these pix of a cooler with a hole cut in the li

Mon Jul 09, 2012 11:32 am

That is a sweet looking rig. Cool that you don't have to modify the hinges.
I have more 5's than 3's, and being able to take a 5 convenient and cold is probably more important. The cobra tap is a lot easier to plumb than a faucet, and I can use the spare change for getting into one of those mini-regulators.
What is the diameter on those cup holders? I'm gonna go for refillable 20oz CO2 if I can, one less thing to throw away.
________

Brew for the future.
Drink in the moment.
User avatar
BierTodd
 
Posts: 38
Joined: Sat Jul 24, 2010 4:26 pm
Location: Oregon Coast

Re: Who owns these pix of a cooler with a hole cut in the li

Mon Jul 09, 2012 11:47 am

Truth wrote:What is the diameter on those cup holders?


2.5"
"Make beer not war"

Currently fermenting: Firestone Walker Pale 31 clone
Conditioning: Nothing
On draught: Nothing

Watch episodes of BYOB TV: http://www.kofytv.com/byob-tv/archive/
User avatar
BeerPal
 
Posts: 1633
Joined: Sat Jun 04, 2005 6:55 am
Location: Martinez, CA

Re: Who owns these pix of a cooler with a hole cut in the li

Mon Jul 09, 2012 12:09 pm

BeerPal wrote:
skibikejunkie wrote:A six gallon bucket is the perfect size for a corny keg + ice. Obviously not insulated, but just add ice from time to time and you're good to go. The top sticks above the ice, but since you're drawing from the bottom, it doesn't matter.

Yeah, but the coolness factor is low and the ghetto factor is high. Pass. :twisted:


Yes, but the cost factor is low and the dick-dance factor is even lower.

Of course I don't ascribe to the "anything worth engineering is worth over-engineering" ethos either.
skibikejunkie
 
Posts: 49
Joined: Tue May 08, 2012 5:22 pm

Re: Who owns these pix of a cooler with a hole cut in the li

Mon Jul 09, 2012 12:15 pm

skibikejunkie wrote:Yes, but the cost factor is low and the dick-dance factor is even lower..

To each his own. For me, the toys are half the fun. :wink:

skibikejunkie wrote:Of course I don't ascribe to the "anything worth engineering is worth over-engineering" ethos either.

My cooler setup will keep beer cold for days without recharging the ice. No mere bucket is going to come close to that performance.
"Make beer not war"

Currently fermenting: Firestone Walker Pale 31 clone
Conditioning: Nothing
On draught: Nothing

Watch episodes of BYOB TV: http://www.kofytv.com/byob-tv/archive/
User avatar
BeerPal
 
Posts: 1633
Joined: Sat Jun 04, 2005 6:55 am
Location: Martinez, CA

Re: Who owns these pix of a cooler with a hole cut in the li

Mon Jul 09, 2012 12:38 pm

BeerPal wrote:My cooler setup will keep beer cold for days without recharging the ice. No mere bucket is going to come close to that performance.


Pfffft, My cooler kills flies with a Hydrogen Fluoride Laser Array.
I'm sick of chasing my dreams. I'm just going to ask them where they're going and hook up with them later.
tlael
 
Posts: 90
Joined: Sun Feb 19, 2012 8:58 am
Location: Belleville, IL

Re: Who owns these pix of a cooler with a hole cut in the li

Mon Jul 09, 2012 3:06 pm

Truth wrote:I'm still pondering using a similar setup for a 3 gallon with a faucet, and this cooler might do the trick with no keg top showing.

It would be pretty simple to build a "stand" out of PVC pipe for the inside of the cooler that would support a 3-gallon corny at any height you wanted. That way the cooler would work for both 3 and 5-gallon kegs.
User avatar
BeerPal
 
Posts: 1633
Joined: Sat Jun 04, 2005 6:55 am
Location: Martinez, CA

Re: Keg cooler build (Was "Cooler with a hole cut in the lid

Mon Jul 09, 2012 7:54 pm

I would just save the piece I cut out and duct tape in there if I needed it for carrying a 3 gallon keg....and take it out when carrying a 5 gallon keg, a little ghetto with the 3 gallon keg but makes it dual purpose...for no extra money (except duct tape..lol)
User avatar
Stinkfist
 
Posts: 682
Joined: Thu Mar 25, 2010 6:25 pm
Location: Northern Kentucky

PreviousNext

Return to Kegging, Bottling and Dispensing

Who is online

Users browsing this forum: No registered users

A BIT ABOUT US

The Brewing Network is a multimedia resource for brewers and beer lovers. Since 2005, we have been the leader in craft beer entertainment and information with live beer radio, podcasts, video, events and more.