Fri May 12, 2006 6:48 am

See, It's this kind of thinking that is going to really confuse a newbie like me. I'm still trying to figure out how much water to put in the mash tun and the HLT. Then here you guys go coming up with ideas that, in my under experienced mind, sound good. I'm thinking about trying all this new stuff before I even master the basics. :? The reality is though, I love the thought processes because I have more to think about as far as future processes. I'm glad to have such a valuable pool of info to pull from though. Thanks Guys. :)
I'm not a slacker in society. I'm an over achieving homeless person.

Drunk posting should be reserved for The RAT PAD!!
User avatar
beer_bear
 
Posts: 1448
Joined: Sat Mar 11, 2006 11:27 am
Location: Memphis,Tenn

Fri May 12, 2006 10:06 am

Dr Scott wrote:
mmayer wrote:HSA is a myth!!!


Don't tell me, I'll bet you're against adding Fluoride in the water too... :P


Flouride casues Communism Doc... you know that...
User avatar
Speyedr
 
Posts: 1069
Joined: Wed Feb 08, 2006 7:59 pm
Location: Harleysville, PA

Fri May 12, 2006 5:14 pm

They just want you to think it's flouride!!
User avatar
mmayer
 
Posts: 36
Joined: Mon Jan 09, 2006 6:15 pm
Location: Cleveland, OH

Sat May 13, 2006 7:12 am

If you used clear tubing from the mash tun to the brew kettle, my guess is that you would be able to observe if/how much air was getting into your system. Air bubbles would be getting trapped in the line, etc. This might help give you an idea of how much aeration you actually get. I would think it should be just minimal though since the open line is only to prevent siphoning. Positioning of the open air line is going to be critical; make sure it's on the "up-side" of the line so the moving liquid doesn't pull air into the tube. Take all this with a grain of salt since I've only brewed extract, but I like your idea. Let us know if it works.
-Greg
Spidey
 
Posts: 103
Joined: Wed May 03, 2006 7:26 pm
Location: Charlottesville, VA

Sat May 13, 2006 9:52 am

I was listening to the 06/19/05 show (the third show) and Morgan from EJ Phair described something he called a "swan arm" that sounds exactly like this idea. The word "swan", if that's what he said, seems appropriate too.

He said it was described to him by a homebrewer and he thought it was a good idea so he tried it.... says it works great.

He said it reduces pressure on the mash, but that part I don't get since the net flow rate through the mash would be the same with or without it.

Sounded to me like he uses this idea on a regular basis. I'm going to email him to comment on it.
code
User avatar
codewritinfool
 
Posts: 2302
Joined: Thu Sep 01, 2005 7:54 pm
Location: St. Louis, MO

Sun May 14, 2006 10:11 am

Hay guys,

This does work like a swan arm. I have a sight gauge on my mash tun which would work like the run off tube being vented to atm. The only risk that I see with HSA would be if the flow reached such a speed to start a venturi and start to suck air in with the wort, which would want to be avoided. I have since then stopped using that method, for no other reason than trying both ways and not noticing much of a difference, but I see no problem with the second diagram, as long as the brewer cut off H.L. early enough to drain mash tun near completly, to get full volume in kettel, with out over sparging and pulling out tannins, because of lowered ph.
Cheers,
Morgan
morgan
 
Posts: 1
Joined: Sun May 14, 2006 9:54 am

Sun May 14, 2006 11:39 am

Aha! I invented the swan arm! Oh, wait. Nevermind.
code
User avatar
codewritinfool
 
Posts: 2302
Joined: Thu Sep 01, 2005 7:54 pm
Location: St. Louis, MO

Mon May 15, 2006 9:14 am

HSA is still a huge question mark for me. I try never to spash.

But check this out:


Image

This is a picture I took of first running from the lauter tun at Anchor Steam on a guest brewer day I got to do.

Would you call this HSA? They don't seem to care about it.

Carlo
User avatar
hopbumpingbrewer
 
Posts: 268
Joined: Sun Jun 19, 2005 12:36 pm
Location: Sonoma, CA

PreviousNext

Return to All Grain Brewing

Who is online

Users browsing this forum: MSN [Bot]

A BIT ABOUT US

The Brewing Network is a multimedia resource for brewers and beer lovers. Since 2005, we have been the leader in craft beer entertainment and information with live beer radio, podcasts, video, events and more.