Beer Forum

This is a forum for enlisted and new recruits of the BN Army. Home brewers bringing it strong! Learn how to brew beer, trade secrets, or talk trash about your friends.
http://www.thebrewingnetwork.com/forum/

Witbier

http://www.thebrewingnetwork.com/forum/viewtopic.php?f=1&t=22804

Page 1 of 2

Witbier

Posted: Thu Nov 11, 2010 2:15 pm
by Neuron_Theory
Hey kids. Anyone have experience with Wyeast 3944 (Belgian Witbier) fermenting really slowly at the low end of its temp range (63-64 F)? I did one almost two weeks ago, pitched a proper size starter of 3944 that was active at the time, and the beer still has a 2" krausen on top and I can still see activity in the carboy and in the airlock. I haven't done a gravity reading because I didn't want to open it, but I might just do one this weekend if the krausen hasn't fallen.

I'm not too concerned yet, just wondered if anyone had any thoughts.

Re: Witbier

Posted: Wed Dec 01, 2010 11:14 am
by lazerface
I am using the same kind of yeast 3944, and it has been fermenting steady, it's been a week now today and still chugging. I pitched a proper size starter of 3944 that was active at the time, and the beer still has a 2" krausen on top and I can still see activity in the carboy and in the airlock as well. My starting temp was 68 and have been rousing the yeast about every other day maybe more frequently. Last night I bumped it up to 69 to speed things up. Any one else use this yeast and have found the same things to be true?

If a admin happens to see this could you maybe move this to "fermentation" thanks.

Re: Witbier

Posted: Wed Dec 01, 2010 11:31 am
by Neuron_Theory
It may just be a characteristic of the yeast I suppose. My beer finished at 1.010 for an apparent attenuation of 76.6%. No off flavors that I tasted in the sample, but I haven't had the conditioned beer yet.

Re: Witbier

Posted: Wed Dec 01, 2010 4:33 pm
by brewinhard
This yeast strain is a notorious "top cropper". That means that your krausens will be huge b/c all of the yeasties rise to surface of the wort and frequently stay there instead of fermenting your precious malt sugars below. Lazerface has the right idea by every other day or so gently swirling the fermenter to knock the krausen and yeast back into suspension so they can finish their job. Just be patient and they will complete their fermentation. Raising the temps a bit towards the end into the low 70's can also help with better attenuation.

Re: Witbier

Posted: Wed Dec 01, 2010 8:58 pm
by Desertbrewin
Same issues with the white lab version of the wit yeast. Need to swirl the carboy frequently after the first day or so, fermentation takes forever, but it's worth the wait. Not sure what they do with the 14 gal + fermenters

Re: Witbier

Posted: Fri Dec 03, 2010 1:40 pm
by lazerface
10th day of fermentation on my Witbier, seems to have a little something going on still a little bubble every 5-10 seconds out of the blowoff tube. Raised temp to 70F and will rousing 2 times a day about 12 hours apart. Hopefully it stops within the weekend so i can give it a 3 day diacetyl rest.. Temp controlled fermentation environment come at a premium at this house.

Re: Witbier

Posted: Mon Dec 13, 2010 10:56 pm
by lazerface
Image

should I be concerned with the black dots that have appeared after fermentation was complete. The beer tasted fine before I keged it. wyeast 3944 belgian witbeer

Re: Witbier

Posted: Tue Dec 14, 2010 3:43 pm
by Neuron_Theory
Did the krausen come all the way up and touch the inside of that cap? And if so, were there spices in the beer, and a few spice particles stuck to the cap?

All times are UTC - 8 hours
Page 1 of 2